ABSORBENT SPONGE ANTIBACTERIAL 250ML

Spec/Size

Product Code	250858112200
Color	LIGHT GRAY
Size	W8.5 x D2 x H18cm
Materials	PVA
Weight	0.09kg
Warranty	-
Assembly Type	Assembled
Assembly Time	-
Delivery Type	DropOffDelivery
Package Size	W14 x D2 x H26cm
Package Weight	0.1kg
Made In	JAPAN

●Antibacterial specifications
●Approximately 10 times the water absorption (※Dry weight ratio of this product)
●The 60 micron fine three-dimensional structure of the PVA sponge material absorbs water rapidly, absorbing approximately 250 mL of water at once
●It drains water well, so the more you squeeze it, the more absorbent it recovers
●Repeated "wiping ⇆ squeezing" will not reduce water absorption
●Can be used to wipe off water droplets around the house, such as splashes around the sink, water droplets in the bathroom, and condensation on window glass
●Can also be used to absorb drinks spilled on carpets and floors, dirt, stains, etc.
●Recommended for pooled water on sash rails
●Can also be used to absorb drink stains

[How to use]
●When using for the first time, wash thoroughly with water and squeeze before use.
●It will become hard when it dries. Soak in water or lukewarm water to soften it before use.
●Soak in water, wring it out well, and then slowly slide the sponge to wipe off water droplets and condensation.
●If you squeeze it, the absorbency will recover, so repeat "wiping ⇆ squeezing".
●When absorbing spilled water, dirt, stains, etc. on a carpet, hold the sponge with your hand for a few seconds and slowly release it.
*For heavy dirt or dry dirt, repeat the above steps or dissolve the dirt with mild detergent and lukewarm water before absorbing it.
*If it gets dirty, wash it thoroughly with mild detergent.
●You can cut it to the size and shape you want depending on the situation.
*After wetting it with water and squeezing it, cut it while it is soft.
*When cutting, be careful not to cut your fingers.

[Water absorption capacity (approx.)]
250mL

[Size (approx.)]
Width 18 x Depth 8.5 x Height 2 cm (when wet)

[Material]
PVA sponge

[Heat resistance temperature]
60℃

[Handling precautions]
●The isothiazolinone preservative contained in this product may cause allergic contact dermatitis. Be sure to wash it thoroughly with water before using it for the first time.
●Condensation may occur inside the packaging film, but this does not affect the quality.
●Due to the nature of the product, the sponge may have dents or other marks, but this does not affect the quality or functionality.
●Leaving it dirty can cause mold and other issues. Wash thoroughly after use and wring it out before storing.
●If it is very dirty, use soap or a neutral detergent.
●When using bleach, be sure to use it in accordance with the bleach usage conditions.
*(Example of use: Dilute 5ml of chlorine bleach per 1L of water, soak for about 2 minutes, then rinse thoroughly with water.) If the bleach is used at a concentration higher than the specified concentration, soaked for longer than the specified amount, or rinsed insufficiently, the material will deteriorate and the color will fade.
●Do not place in boiling water, in a high temperature location, or in direct sunlight.